fibreCut-coated blades

Cutter blades with high performance coating for fiber composite processing

CFRP, GFRP, aramid, basalt, graphite and others - the diversity of fiber-reinforced and / or abrasive materials is broade and the demand is constantly growing. Due to the high abrasiveness of these materials, conventional cutter blades often do not reach a sufficient lifetime. In addition, the resin of the composite material can adhere to the cutting edge and the free surface.

At Cut Expert, we have studied this problem and are presenting our unique fibreCut-coating - a submicron DLC-coating especially processing highly abrasive materials. Up to triple liefetimein combination with greatly reduced adhesions at a small extra charge make fibreCut-coated cutter blades the most costeffective option for these applications.

Your advantages:

- Highly increased lifetime
- Less adhesion
- Lower cutting forces
- Less blade changes
- Significant cost savings
- High wear resistance

We would be happy to provide you with test blades.

Cutter blades with high performance coating for fiber composite processing CFRP, GFRP, aramid, basalt, graphite and others - the diversity of fiber-reinforced and / or abrasive materials... read more »
Close window
fibreCut-coated blades

Cutter blades with high performance coating for fiber composite processing

CFRP, GFRP, aramid, basalt, graphite and others - the diversity of fiber-reinforced and / or abrasive materials is broade and the demand is constantly growing. Due to the high abrasiveness of these materials, conventional cutter blades often do not reach a sufficient lifetime. In addition, the resin of the composite material can adhere to the cutting edge and the free surface.

At Cut Expert, we have studied this problem and are presenting our unique fibreCut-coating - a submicron DLC-coating especially processing highly abrasive materials. Up to triple liefetimein combination with greatly reduced adhesions at a small extra charge make fibreCut-coated cutter blades the most costeffective option for these applications.

Your advantages:

- Highly increased lifetime
- Less adhesion
- Lower cutting forces
- Less blade changes
- Significant cost savings
- High wear resistance

We would be happy to provide you with test blades.

Close filters
to
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
CE11-B (fibreCut-coated) CE11-B (fibreCut-coated)
replacement for: Zünd Z11 coated max. cutting depth: 6,9 mm pre-cut: 0,58 x Tm post-cut: 0,58 x Tm shaft width: 8 mm length: 50 mm cutting angle: 2 x 60° blade thickness: 1,5 mm beschichtet
for guests no price
CE16-B (fibreCut-coated) CE16-B (fibreCut-coated)
replacement for: Zünd Z16 coated Esko BLD-SF216 coated Bullmer B16 coated iEcho E16 coated Mecanumeric 100610440 coated max. cutting depth: 7,4 mm pre-cut: 0,73 x Tm shaft width: 5,65 mm length: 25 mm cutting angle: 55° blade thickness:...
for guests no price
CE17-B (fibreCut-coated) CE17-B (fibreCut-coated)
replacement for: Zünd Z17 coated Esko BLD-SF217 coated Bullmer B17 coated iEcho E17 coated Mecanumeric 100610390 coated max. cutting depth: 12 mm pre-cut: 0,47 x Tm shaft width: 5,65 mm length: 25 mm cutting angle: 65° blade thickness:...
for guests no price
CE26-B (fibreCut-coated) CE26-B (fibreCut-coated)
replacement for: Zünd Z26 coated Esko BLD-SF426 coated iEcho E26 coated Mecanumeric 100610400 coated max. cutting depth: 8,7 mm pre-cut: 1,2 + 0,51 x Tm shaft width: 5,65 mm length: 25 mm cutting angle: 12° + 65° blade thickness: 0,63 mm...
for guests no price
CE42-B (fibreCut-coated) CE42-B (fibreCut-coated)
replacement for: Zünd Z42 coated iEcho E42 coated max. cutting depth: 7,8 mm pre-cut: 0,05 + 0,7 x Tm post-cut: 0,8 shaft width: 5,5 mm length: 28 mm cutting angle: 55° blade thickness: 0,63 mm beschichtet
for guests no price
CE50-B (fibreCut-coated) CE50-B (fibreCut-coated)
replacement for: Zünd Z50 beschichtet Esko BLD-RC110 beschichtet Bullmer B50 beschichtet max. cutting depth: 3,5 mm blade thickness: 0,6 mm diameter: 25 mm bore: 8 mm beschichtet
for guests no price
CE42S-B (fibreCut-coated) CE42S-B (fibreCut-coated)
replacement for: Bullmer TB42 / 107506 beschichtet max. cutting depth: 7,8 mm pre-cut: 0,05 + 0,7 x Tm post-cut: 0,8 shaft width: 5,5 mm length: 25 mm cutting angle: 55° blade thickness: 0,63 mm beschichtet
for guests no price
CE51-B (fibreCut-coated) CE51-B (fibreCut-coated)
replacement for: Zünd Z51 beschichtet Bullmer B51 beschichtet max. cutting depth: 5 mm blade thickness: 0,6 mm diameter: 28 mm bore: 8 mm beschichtet
for guests no price
CE52-B (fibreCut-coated) CE52-B (fibreCut-coated)
replacement for: Zünd Z52 beschichtet Bullmer B52 beschichtet max. cutting depth: 7 mm blade thickness: 0,6 mm diameter: 32 mm bore: 8 mm beschichtet
for guests no price
Viewed